top of page

CONDOR® CHCHK-1500

Part # PS-1500 Pit-Stop/Trailer

​

Looking for a safe way to store or transport your chopper? CONDOR® Products, has just what you are looking for. The CONDOR® Chopper Chock CHCHK-1500 will do the trick. The Chopper Chock is capable of accommodating all Chopper front wheel sizes. With 2 cradle choices, one for the 120 wide tire and another for the 80-90 wide tire, the patented locking mechanism effortlessly and securely supports your motorcycle in an upright position on the ground or on a trailer.

 

The Chopper Chock works on all extremely low fender cases. It can be used on pavement, concrete, dirt, sand, gravel and all forms of transport platforms such as trailers and pick-up trucks. On the trailer it can easily snap on and off. In a pick-up truck, it may be used free standing like in your garage. With the Chopper Chock, tying down a motorcycle becomes a simple and easy task for one person.

US Pat. NOS. 6,575,310 & 6,648,300 & 6,935,619

  • Self locking

  • Easy loading and unloading

  • Supports all bikes securely upright

  • Fits every motorcycle

  • Accommodates front and rear tires

  • Works on all trailers, trucks and transport platforms

  • Quick disconnect kits

  • Folds to become compact

  • Weighs only 26 lbs

  • Upright postition 9" wide X 25" long X 15" high

  • Folded position 9" wide X 25" long X 6" high

CONDOR® SCC-4000

Part #SCC-4000 Scooter Chock

​

The CONDOR® SCC-4000 Scooter/Moped Chock is a fully adjustable wheel locking system capable of accommodating front and rear wheel sizes for Mopeds, Scooters, and will also suit most sport bikes. The patented locking mechanism effortlessly and securely supports your ride in an upright position on all transportation platforms. As a Chock it easily snaps on and off all transport platforms. Attaching and detaching the unit takes only a few seconds. Tying down your ride becomes a simple and easy task for one person.

 

You will be amazed at how secure and safe your ride will be once tied down in the CONDOR® SCC4000 cradle. The CONDOR® SCC-4000 accommodates bikes weighing up to 800 lbs, folds down for easy storage and weighs only 22+ lbs. Its dimensions in the upright position are about 7” wide, 22” long and 13.25”-15.25” high. Once folded, it becomes 7” wide, 19” long and 7” high.

US. Pat. NOS. 6.575,310 & 6,648,300 & 6,935,619

  • Self locking

  • Easy loading and unloading

  • Supports scooters/moped/ only front tires on sportbikes

  • Accommodates front and rear tires

  • Works on all trailers, trucks and transport platforms

  • Quick disconnect kits

  • Folds to become compact

  • Weighs only 25+ lbs

  • Upright position 8" wide X 24" long X 14" high

  • Folded position 8" wide X 24" long X 6" high

CONDOR® SC-2000

Part #SC-2000 Trailer Only Trailer Adaptor Kit

 

The CONDOR® SC-2000 Trailer Only Chock is a fully adjustable wheel locking system capable of accommodating front and rear wheel sizes from 14-22” / 80-220W. The patented locking mechanism effortlessly and securely supports your motorcycle in an upright position on all transportation Platforms. As a Trailer Chock it easily snaps on and off all transport platforms. Attaching and detaching the unit takes only a few seconds.

 

Tying down a motorcycle becomes a simple and an easy task for one person. In most cases, the motorcycle needs only to be tied down with two straps, one on either side with attachments towards the middle or the rear of the bike, with no need for front tie-downs. You will be amazed at how secure and safe your ride will be once tied down in the CONDOR® SC-2000 cradle.

The CONDOR® SC-2000 accommodates bikes weighing up to 3000 lbs, folds down for easy storage and weighs only 26+ lbs. It’s dimensions in the upright position are 9” wide, 25” long and 15” high. Once folded, it becomes 9” wide, 25” long and 7” high. The SC-2000 comes complete with brackets and hardware to mount this unit to your trailer or lift table. The only thing not included is the reinforcement plates for under the trailer you need two.

  • Self locking

  • Easy loading and unloading

  • Supports all bikes securely upright

  • Fits every motorcycle

  • Accommodates front and rear tires

  • Works on all trailers,trucks and transport platforms

  • Quick disconnect kit

  • Folds to become compact

  • Can accommodate bikes weighing up to 3000 lbs

  • Weighs only 21+ lbs

  • Upright position 9" wide X 25" long X 15" high

  • Folded position 9" wide X 25" long X 7" high

The Pit-Stop/Trailer-Stop & Trailer Adaptor Kit

Part # TK-3000 Adapter Kit

​

The CONDOR® Pit-Stop/Trailer-Stop is a fully adjustable wheel locking system which accommodates all motorcycles the PS-1500 works on pavement, concrete, dirt, sand, gravel and all forms of transport platforms such as trailers and pick-up trucks. The CONDOR® Pit-Stop/Trailer-Stop is a fully adjustable wheel locking system capable of accommodating front and rear wheel sizes from 14-22"/ 80-230W. The patented locking mechanism effortlessly and securely supports your motorcycle in an upright position on the ground or on a trailer.

The Pit-Stop also serves as a Trailer-Stop and easily snaps onto trailers or pick-up beds with the adapter kit. With the Trailer-Stop, tying down a motorcycle becomes a simple and easy task for one person. You will be amazed at how secure and safe your ride will be once tied down in the CONDOR® Trailer-Stop cradle. The CONDOR® Pit-Stop/Trailer-Stop accommodates bikes up to 3000 lbs., folds down for easy storage and weighs only 21+ lbs.

bottom of page